X9C pro
Installation method:Ceiling/Placement
Interface properties:Gigabit R J45 copper port * 1 , 2.5G copper port* 1 , 10G SFP+ optical port* 1
local power supply:Support 48V 0.5A DC
PoE powered:Meet the 802.3at Power over Ethernet standard
描述
SOFTWARE SPECIFICATIONS
Antenna type | Built-in 1 high-efficiency antenna | |
Antenna gain (default omnidirectional antenna) |
2.4G: 4dBi | |
5G- 1 : 4dBi | ||
5G - 2 : 4d Bi | ||
Working frequency | 802.11ax/ac/n/a : 5.725GHz-5.850GHz ; 5.15~5.35GHz (China) | |
802.11ax/b/g/n : 2.4GHz-2.483GHz (China) | ||
wireless rate | 2.4G: 4 * 4 11ax 1200 Mbps | |
5G-1 : 4 * 4 11ax 4800 Mbps | ||
-2 : 2 * 2 11ax 2400M bps | ||
The maximum transmit power of the whole machine | 2.4 GHz: 23dBm (combined power) | |
5GHz -1 : 23dBm (combined power) | ||
5 GHz-2 : 23 d Bm (combined power) | ||
Actual transmit power varies according to the regulations of different countries and regions | ||
Modulation technology | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps | |
DSSS : DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps | ||
MIMO-OFDM (11n): MCS 0-15 | ||
MIMO-OFDM (11ac): MCS 0-9 | ||
MIMO-OFDM (11ax): MCS 0-11 | ||
Modulation | 11b: DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps | |
11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps | ||
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM | ||
11ac/ac wave2: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM | ||
11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM | ||
Power adjustment | The system automatically adjusts | |
Reset/restore factory configuration | Support hardware reset and software reset | |
Led | Steady on/flashing (the indicator light can be turned off by software) | |
Operating temperature/Storage temperature | -10ºC~40ºC/-40ºC~70ºC | |
Working humidity | 5%~95% (non-condensing) | |
Protection class | IP41 | |
The maximum power consumption of the whole machine | < 24W _ | |
EMC | GB9254, EN301489, EN55022, | |
FCC Part 15, RSS-210 | ||
Certification | Can meet FCC/CE/RoHS | |
MTBF | >250000H |
11ax support | Working frequency | 2.4GHz+5GHz |
A-MPDU | support | |
A-MSDU | support | |
MU-MIMO | support | |
OFDMA | support | |
Switching Beamforming (TxBF) | support | |
Maximum Similarity Demodulation (MLD) | support | |
Maximum Combined Ratio Receive (MRC) | support | |
Space Time Block Code (STBC) | support | |
Low Density Parity Check Coding (LDPC) | support | |
11n support | Working frequency | 2.4GHz+5GHz |
A-MPDU | support | |
Maximum Similarity Demodulation (MLD) | support | |
Switching Beamforming (TxBF) | support | |
Maximum Combined Ratio Receive (MRC) | support | |
Space Time Block Code (STBC) | support | |
Low Density Parity Check Coding (LDPC) | support | |
WLAN Basics | Maximum number of access users per radio | 256 |
Virtual AP | 4 | |
WPAPSK/WPA2PSK/WPA3 | support | |
RTS/CTS | support | |
guest network | support | |
Smart device unique SSID | support | |
Wired networking | Automatic discovery and authorization networking | |
Link failure detection and automatic recovery | support | |
Advanced networking | Automatic channel adjustment for the entire network | support |
Automatic bandwidth adjustment for the entire network | support | |
Automatic power adjustment of the whole network | support | |
Network self-management | Distributed AP ad hoc network, APs can be added or replaced as needed | |
Security strategy | encryption | Support AES, WPA3 security encryption |
802.11i | support | |
Certification | MAC address authentication/PSK authentication | |
User isolation | 1. Layer 2 isolation of wireless users | |
2. SSID-based wireless user isolation | ||
Forwarding security | Support packet filtering, MAC address filtering, broadcast storm suppression, etc. | |
SSID and VLAN binding | support | |
Management Frame Protection (802.11w) | support | |
Layer 2 and Layer 3 functions | IP address settings | Support: Static IP address, DHCP to obtain IP address or PPPoE dial-up |
local forwarding | Support: local forwarding based on SSID+VLAN | |
multicast | IGMP Snooping | |
Wireless Advanced Features | 802.11e | Support WMM |
priority | Support Ethernet port 802.1p identification and marking | |
Support wireless priority to wired priority mapping | ||
Ai QoS | Supports mapping based on application service flow identification and air interface queues | |
ATF air interface resource allocation | Supports air interface fair scheduling based on client and SSID; | |
guest network air interface resource allocation | ||
Auto Channel/Auto Band/Auto Power | support | |
load balancing | Based on traffic/number of users/band/air interface load | |
802.11k/802.11v/802.11r | support | |
AP Steering | support | |
Band Steering | support | |
Automatic power adjustment/packet-by-packet power adjustment | support | |
Multicast enhancement | Support: Multicast to Unicast (IPv4) | |
Beamforming+ between wireless networking nodes | support | |
Green technology | Packet-by-Package Power Control (PPC) | support |
Green AP mode | support | |
Dynamic MIMO power saving | support | |
Enhanced Automatic Power Save Delivery (E-APSD) | support | |
WMM Power Save | support | |
Installation, management, maintenance | APP-guided start | support |
Network pre-deployment | support | |
APP local management/remote management | support | |
Cloud AC | support | |
Remote maintenance | support | |
AP point finding | support |