Installation method:Ceiling/Placement

Interface properties:Gigabit R J45 copper port * 1 , 2.5G copper port* 1 , 10G SFP+ optical port* 1

local power supply:Support 48V 0.5A DC

PoE powered:Meet the 802.3at Power over Ethernet standard

Related Products


Antenna type Built-in 10 high- efficiency antennas
Antenna gain
(default omnidirectional antenna)
2.4G: 4dBi
5G- 1 : 4dBi
5G - 2 : 4d Bi
Working frequency 802.11ax/ac/n/a : 5.725GHz-5.850GHz ; 5.15~5.35GHz (China)
802.11ax/b/g/n : 2.4GHz-2.483GHz (China)
Wireless rate 2.4G: 4 * 4 11ax 1200 Mbps
5G : 4 * 4 11ax 4800 Mbps
The maximum transmit power of the whole machine 2.4 GHz: 23dBm (combined power)
5GHz: 23dBm (combined power)
Actual transmit power varies according to the regulations of different countries and regions
Modulation technology OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS : DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
MIMO-OFDM (11n): MCS 0-15
MIMO-OFDM (11ac): MCS 0-9
MIMO-OFDM (11ax): MCS 0-11
Modulation 11b: DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps
11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11ac/ac wave2: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM
11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
Power adjustment The system automatically adjusts
Reset/restore factory configuration Support hardware reset and software reset
Led Steady on/flashing (the indicator light can be turned off by software)
Operating temperature/Storage temperature -10ºC~40ºC/-40ºC~70ºC
Working humidity 5%~95% (non-condensing)
Protection class IP41
The maximum power consumption of the whole machine < 24W
EMC GB9254, EN301489, EN55022,
FCC Part 15, RSS-210
Certification Can meet FCC/CE/RoHS
MTBF >250000H
11ax support Working frequency 2.4GHz+5GHz
A-MPDU support
A-MSDU support
MU-MIMO support
OFDMA support
Switching Beamforming (TxBF) support
Maximum Similarity Demodulation (MLD) support
Maximum Combined Ratio Receive (MRC) support
Space Time Block Code (STBC) support
Low Density Parity Check Coding (LDPC) support
11n support Working frequency 2.4GHz+5GHz
A-MPDU support
Maximum Similarity Demodulation (MLD) support
Switching Beamforming (TxBF) support
Maximum Combined Ratio Receive (MRC) support
Space Time Block Code (STBC) support
Low Density Parity Check Coding (LDPC) support
WLAN Basics Maximum number of access users per radio 256
Virtual AP 4
RTS/CTS support
guest network support
Smart device unique SSID support
Wired networking Automatic discovery and authorization networking
Link failure detection and automatic recovery support
Advanced networking Automatic channel adjustment for the entire network support
Automatic bandwidth adjustment for the entire network support
Automatic power adjustment of the whole network support
Network self-management Distributed AP ad hoc network, APs can be added or replaced as needed
Security strategy encryption Support AES, WPA3 security encryption
802.11i support
Certification MAC address authentication/PSK authentication
User isolation 1. Layer 2 isolation of wireless users
2. SSID-based wireless user isolation
Forwarding security Support packet filtering, MAC address filtering, broadcast storm suppression, etc.
SSID and VLAN binding support
Management Frame Protection (802.11w) support
Layer 2 and Layer 3 functions IP address settings Support: Static IP address, DHCP to obtain IP address or PPPoE dial-up
local forwarding Support: local forwarding based on SSID+VLAN
multicast IGMP Snooping
Wireless Advanced Features 802.11e Support WMM
priority Support Ethernet port 802.1p identification and marking
  Support wireless priority to wired priority mapping
Ai QoS Supports mapping based on application service flow identification and air interface queues
ATF air interface resource allocation Supports air interface fair scheduling based on client and SSID;
guest network air interface resource allocation
Auto Channel/Auto Band/Auto Power support
load balancing Based on traffic/number of users/band/air interface load
802.11k/802.11v/802.11r support
AP Steering support
Band Steering support
Automatic power adjustment/packet-by-packet power adjustment support
Multicast enhancement Support: Multicast to Unicast (IPv4)
Beamforming+ between wireless networking nodes support
Green technology Packet-by-Package Power Control (PPC) support
Green AP mode support
Dynamic MIMO power saving support
Enhanced Automatic Power Save Delivery (E-APSD) support
WMM Power Save support
Installation, management, maintenance APP-guided start support
Network pre-deployment support
APP local management/remote management support
Cloud AC support
Remote maintenance support
AP point finding support